PA series mixers are designed to provide all the tools you need to run a regular stereo PA system in a straightforward ‘walk up and go’ format. You’ll quickly feel at home with these desks, but you’ll also find that we’ve included a number of those innovative touches that you only get from designers who have many years of ‘real world’ experience. If you care about quality you’ll also appreciate the build standards that the PA series conforms to, including the same individual vertical circuit boards, nutted pots and solid copper buss interconnection as our acclaimed ML series consoles. As for audio performance, PA series mixers have the wonderfully full, open, natural quality that you’d expect from a professional ALLEN&HEATH desk.

Technical Specs
0dBu = 0.775 Volts rms 0dBV = 1 Volt rms
Maximum outputlevel
TRS +21dBu into 2k ohm load
Nominal outputlevel
L-R +0dBu into 600ohm max load
Other o/p's +0dBu into 2k ohmmax load
Internal headroom
Mix to o/p +21dB
Channels+21dB
Peak LEDs
5dB before clipping
Noise -measured rms 22Hz to 22kHz
Mic EIN ref 150 ohm source -128dB
L-Rresidual <-89dBu (nothing routed)
L-R mix <-85dBu (channels routed)
Frequency response
20Hz to 30kHz +/- 0.5dB
THD +10dbu, 1kHz
Channel to mix o/p <0.006%
Crosstalk - 1kHz
Ch to ch <-90dB
Chl mute shutoff<-95dB
Ch fader shutoff <-95dB
Power Amp
Outputpower Constant Power switchable
= 2 x 500w RMS into 4 ohm
= 2 x 500wRMS into 8 ohm
Frequency response THD+N <0.02%@1kHz
MainsPower - Internal unit, linear regulated Internally wired to requiredcountry voltage
AC mains input 100V to 240V AC@50/60Hz
Powerconsumption 1600W max
Mains fuse rating
100-120V AC use T10A 20mm
220-240V AC use T8A 20mm