(eq. sampler synthesizer)
 
     ! OSTALA OPREMA !
     !! MEGA POPUSTI !!
     ACCESS
     ACOUSTIC ENERGY
     AKAI
     ALLEN & HEATH
     ALVA
     APOGEE
     APOGEE LIGHTING
     AUDIO TECHNICA
     AUDIOLAB
     AVALON DESIGN
     BEHRINGER
     BLACK RHODIUM
     BOSPHORUS CYMBALS
     BRAUNER
     CHORD COMPANY
     CME
     COEF
     DAVE SMITH
     DB TECHNOLOGIES
     DIGIDESIGN
     EVENTIDE
     F.A.L. LIGHTING
     FMR AUDIO
     FRONTIER DESIGN
     GHOST ACOUSTICS
     HAD AUDIOLAB
     HOSA TECHNOLOGY
     JJ ELECTRONICS
     KLOTZ CABLES
     MANLEY LABS
     M-AUDIO
     MILLENNIA MEDIA
     NATIVE INSTRUMENTS
     PEARL
     PHONIC
     PIONEER PRO DJ
     PRO-MARK
     QUAD
     RME
     ROGER LINN
     SE ELECTRONICS
     SHERWOOD
     SOUND NEWS
     TANNOY STUDIO
     ULTRASONE
     UNIVERSAL AUDIO
     WEISS
     WEISS HIGH END
     WHARFEDALE HIFI
     WHARFEDALE MI
     WHARFEDALE PRO
     ZOOM
 

 

 



UNIVERSAL AUDIO
2192



The 2192 Master Digital Audio Interface is the first product to combine Universal Audio’s long history of creating high-quality, vintage analog gear with its advanced digital technology. While features like sample rates up to 192K, realtime transcoding between AES/EBU, S/PDIF and ADAT, and support for single and dual wire AES modes are sure to impress, what really sets the 2192 apart is its Class-A analog circuitry, which provides luscious detail and clarity, while retaining the warmth and character of the original source, features typically not found in digital units.
The soul of the 2192 is the analog circuitry used in the A/D and D/A converters.
The 2192 serves as an extremely high-quality digital to analog and analog to digital converter. If, for example, you’re working on a digital console, or workstation, that utilizes higher sample rates, the 2192 can dramatically improve your monitoring environment and/or the quality of your analog masters. As a front end for a native workstation, the 2192 provides two channels of sterling sound quality for tracking, monitoring and mastering.
The 2192 also offers tremendous flexibility in signal routing and monitoring. You can, for example, run signal into the analog inputs, at samples rate ranging from 44.1K to 192K, and simultaneously output it to AES/EBU (single- or dual-wire), S/PDIF and ADAT (with industry standard S-MUX interleaving for sample rates above 48kHz). The selectable output monitor allows you to monitor any of the digital inputs, or the analog input with no interruption of the transcoding.

Features
Ultra-low noise 44.1kHz – 192kHz A/D and D/A converters
Low jitter internal clock source provides 44.1, 48, 88.2, 96, 176.4 and 192kHz sampling rates
DC-coupled, fully dual-differential, matched-FET, all discrete Class-A, no-compromises analog signal path
No capacitors in the signal path to degrade sound quality or introduce phase distortion
2 channel ADAT S-MUX I/O for 44.1 to 48kHz transmission of 44.1 to 192kHz audio
2 Channel transformer coupled AES/EBU I/O (44.1kHz – 192kHz)
Support for single and dual wire AES/EBU at 96 and 192kHz rates
2 Channel transformer coupled S/PDIF I/O (44.1kHz – 192kHz)
Realtime transcoding between digital formats
Independent digital and analog output routing
4 parallel 75 ohm BNC Word Clock outputs for jitter-free and reflection-free clock distribution
2 separate 75 ohm BNC Word Clock inputs capable of synchronizing to 1x house clocks while running at higher 2x and 4x sample rates
Front panel Sync-Lock indicator
Sturdy front panel rotary switches provide Clock, Sample Rate, Analog Output and Digital Output source selection
Full 24-bit digital signal path throughout
No digital processing of the audio signal
Multi-segment LED bargraph metering on all analog inputs and outputs, with timed peak-hold digital overload (input) and digital peak (output) indicators
Internal universal auto-sensing, filtered, multi-stage regulated power supply supports 100-240VAC and 50-60Hz power for trouble-free operation world-wide
Rugged 1U rack mount steel chassis

Technical Specifications
Analog
Inputs:
2x balanced XLR female connectors
DC coupled, dual-differential
Common-mode rejection ratio (CMRR): >90dB
Impedance: ~1.5k ohms
Maximum input level: +31dBu
Outputs:
2x balanced XLR male connectors
DC coupled, dual-differential
Impedance: ~95ohms
Maximum output level: +23dBu
Frequency Response (analog input to ADC to DAC to analog output, referenced to 1kHz, Fs = 192kHz):
+- 0.1dB, 10Hz to 40kHz, -1dB at 74kHz
Analog Level Trim:
ADC input (Lo-Z source):
Max input for 0dBFS: +30dBu
Min input for 0dBFS: +5.5dBu (3dBV)
DAC output (Hi-Z load):
Max output at 0dBFS: +23dBu
Min output at 0dBFS: +4dBu (+1.8dBV)
Factory trim:
Headroom: +18dB
Reference level: +4dBu = -18dBFS
Max input/output at 0dBFS: +22dBu
Trim accessed via 15-turn, rear-panel mounted potentiometer
Conversion
A/D:
Dynamic range (measured using -38dBu = -60dBFS input at 1kHz
118dB (A-weighted), 115dB (unweighted)
Frequency response (relative to 1kHz):
+- 0.02dB, 10Hz to 20kHz @ Fs = 44.1kHz
+- 0.04dB, 10Hz to 40kHz @ Fs = 96kHz
Phase response:
<0.1 degrees, 10Hz to 1kHz
-1.0 degrees at 20kHz
Residual noise (200Hz-20kHz):
< -145dBFS (-123dBu)
THD+N (measured at 1kHz):
-110dB, with +4dBu input
-114dB, with -10dBu input
D/A:
Dynamic range (measured with -60dBFS = -38dBu output at 1kHz
122dB (A-weighted), 119dB (unweighted)
Frequency response (relative to 1kHz):
+- 0.03dB, 10Hz to 20kHz @ Fs = 44.1kHz
+- 0.04dB, 10Hz to 20kHz @ Fs = 96kHz
Phase response:
<0.5 degrees, 10Hz to 1kHz
-10 degrees at 20kHz
Residual noise (200Hz-20kHz):
< -145dBFS (-123dBu)
THD+N (measured at 1kHz):
-98dB, with +4dBu output
-103dB, with -10dBu output
Clock
Sample Rate (internal):
44.1, 48, 88.2, 96, 176.4, 192 kHz
Sample rate (external):
+- 12.5% vari-speed lock at all rates
4x BNC Clock Outputs:
75 ohm
5V CMOS drive
2x BNC Clock Inputs:
75 ohm internal termination
AC coupled
1.2V(p-p) minimum
5V(p-p) maximum, 50mA maximum over-voltage current (20 ohms/volt)
BNC Clock In to Clock Out Delay:
50ns maximum
Negative edge aligned when synchronized at multiple or submultiple rate
Digital
2-Channel S/PDIF:
Dual stacked RCA
Unbalanced, transformer driven output
AC coupled input
2-Channel AES/EBU:
Transformer isolated, balanced XLR (x4)
Single wire and dual-wire modes (for sample rates above 48kHz)
AES/SPDIF input bits:
SCMS: Ignored
Preempahsis: Ignored
Professional/consumer: Ignored
AES/SPDIF output bits:
SCMS: Not set
Preempahsis: Not Set
Professional/consumer: Set to Professional
2-Channel ADAT Optical:
Dual in-line optical TX/RX (reinforced)
Physical
Physical dimensions:
1RU standard 19” rack-mount chassis
11.5” depth behind front panel
1” front panel clearance
17” chassis width
Total dimension: 1.75” H, 19” W, 12.5” D
Thermal:
0 degrees C to 50 degrees C
AC Line:
IEC 3-pin power (safety ground ties to chassis at entry point)
100-240VAC, 50-60Hz, auto-sensing
40 Watts
 


Potrošački krediti: 
Bez PDV-a:

 
M-AUDIO
M-AUDIO
ZOOM
ZOOM
RME
RME
WHARFEDALE PRO
WHARFEDALE PRO
ZOOM
WHARFEDALE HIFI

 
Kontakt
MALOPRODAJA
Nehajska 59
HR-10000 Zagreb
Radno vrijeme:
Pon-pet:
9:00 - 18:00
Sub: 9:00 - 14:00
 
Tel : 01 5499-725
Fax: 01 5499-726
Email: prodaja@provox.hr
----------------------------
 
VELEPRODAJA
Nehajska 59
HR-10000 Zagreb
Radno vrijeme:
Pon - Pet: 9:00 - 17:00
 
Tel: 01 5499-725
Fax: 01 5499-726
veleprodaja@provox.hr

Provox Multimedia
Provox Games
Studio Šišmiš
Demobands.com